DIN 605 - Flat Countersunk Square Neck Bolts

DIN 605 - Flat Countersunk Square Neck Bolts

DIN Fastener:

DIN-Cap nuts
DIN-Castle nuts
DIN-Clevis pins
DIN-Clevis pins
DIN-Knurled nuts
DIN-Shim rings
DIN-Slotted head screws
DIN-Square head bolts
DIN-Square nuts
DIN-Tapping screws
DIN-Thread forming screws
DIN-Washers for use in structural steelwork
DIN-Weld nuts
DIN-Weld screws
DIN-Wood screws
DIN-Cross recessed head screws
DIN-Double end studs
DIN-Pins
DIN-Nails
DIN-Hexagon head bolts and screws
DIN-Hexagon head bolts and screws for use in DIN-Structural steelwork
DIN-Drilling screws with tapping screw thread
DIN-Split pins
DIN-Plain washers
DIN-Hexalobular head bolts
DIN-Prevailing torque type nuts
DIN-Sepcial washers
DIN-Miscellaneous bolts and screws
DIN-Miscellaneous nuts
DIN-Retaining rings
DIN-Keys

Fastener>> DIN Fastener >> DIN 605 - Flat Countersunk Square Neck Bolts

DIN 605 - Flat Countersunk Square Neck Bolts

Screw Thread d			M6		M8		M10
P Thread Pitch			1		1.25		1.5
b	l≤125mm		18		22		26
	125mm<l≤200mm		24		28		32
	200mm <l		/		41		45
dk	max		16.55		20.65		24.65
	min		15.45		19.35		23.35
ds	max		6		8		10
	min		5.52		7.42		9.42
f	max		7.45		9.45		11.55
	min		6.55		8.55		9.45
r	max		0.9		1.2		1.5
u	max		6.48		8.58		10.58
	min		5.52		7.42		9.42
L			Shank Length Ls & Lg
Nominal Size	min	max	Ls min	Lg max	Ls min	Lg max	Ls min	Lg max
30	28.95	31	-	12.5	-	16	-	-
35	33.75	36.25	-	12.5	-	16	-	-
40	38.75	41.25	17	22	-	16	-	18
45	43.75	46.25	22	27	16.75	23	-	18
50	48.75	51.25	27	32	21.75	28	16.5	24
55	53.5	56.5	32	37	26.75	33	21.5	29
60	58.5	61.5	37	42	31.75	38	26.5	34
65	63.5	66.5	-	-	36.75	43	31.5	39
70	68.5	71.5	-	-	41.75	48	36.5	44
80	78.5	81.5	-	-	51.75	58	46.5	54
90	88.25	91.5	-	-	-	-	56.5	64
100	98.25	10.75	-	-	-	-	66.5	74

DIN 601-700
DIN 601- Hexagon head bolt with nut
DIN 603 Mu - Carriage Bolts With Hexagon Nuts
DIN 604 - Flat Countersunk Nip Bolts With Hex Nuts
DIN 605 - Flat Countersunk Square Neck Bolts
DIN 607 - Round Head Nip Bolts With Nuts
DIN 608 - Countersunk Square Bolts (Short Neck)
DIN 609 - Hex Fitting Bolts w/long Threaded Portion
DIN 610 - Hex fitting Bolts w/short Threaded Portion
DIN 653 - Flat Knurled Thumb Screws
DIN 660 - Round Head Rivets
DIN 661 - Countersunk Head Rivets

This Website describes DIN standard Fastener in China.Wenzhou Nanlong Import & Export Trading CO.,LTD.(China)-There are DIN 605 - Flat Countersunk Square Neck Bolts.And the the material are stainless steel (TP304-18-8,316,316L,310S.309S..317L.347H,904L...),carbon steel (C1018 C1022),aluminium,brass and so no.

DIN 605 - Flat Countersunk Square Neck Bolts